Cluster Detail
West Bengal     Kolkata     Kunor


A cluster is defined as a geographic concentration(a city/town/few adjacent villages and their adjoining areas)of units producing near similar products and facing common opportunities and threats.An artisan cluster is defined as geographically concentrated(mostly in villages/townships)household units producing handicraft/handloom products.In a typical cluster,such producers often belong to a traditional community,producing the long-established products for generations.Indeed,many artisan clusters are centuries old Artisan.

 

About Kunor Cluster:-


Kunor Cluster falls under West Bengal State in Kolkata district.

 


The 
Kunor Cluster is able to form above 500 Artisans and 15 SHGs supporting the strong work force.The mobilisation gains momentum day by day.

 

___________________________________________________________________________________________________________________________

 

 

Terracotta:-


 

The finest patterns of terracotta panels can be found in Bengal towns of Murshidabad, Birbhaum, Jessore, Hooghly and Digha. The theme is generally folk and the patterns are fairly highlighted with traditional skill and explicit artwork.

The clay used is generally a blend of two to three clays found in river beds, pits and ditches. More often than not the fuel used is one of the local resources available in the form of twigs, dry leaves or firewood. The kilns where the clay pots are baked are operated at temperatures between 700 – 800 degrees celcius.

The womenfolk in the khumbkar families are the potters who work on the wheels making the round necks and the upper halves of the pots. They also make solid clay toys and dolls which are cast in burnt clay moulds. Large figurines of gods and goddesses are also made in clay and generate a lot of income for these families.

Terracotta, which is found mainly in rural parts of West Bengal, has found inroads into mainstream lifestyle with many household using the suraii, a clay pitcher used to keep water cool. Most rural households use terracotta feeding bins for cattle, tea mugs, clay pots for cooking rice, plates, tumblers, yoghurt pots. Most of the items though are of the use and throw variety.

 

India is rich in her terracotta and pottery traditions many of which have their roots in prehistory. Pottery has a wide universality and its tradition goes back to span of five millennium.Terracotta pottery has been called the lyric of handicrafts because of its irresistible appeal.A variety of earthen objects are created such as lamps, pitchers, flower vases, pots, musical instruments, candle stands etc. 
 

 

Raw materials:- 

 

Basic Material : Mitti / clay, mustard oil, potter wheel, gum, starch, wax,Clay, potters wheel, twigs, dry branches, leaves, firewood, rice straw, Red clay, black clay, pilli mitti, yellow clay,Various types of Mitti (clay/mud), edible gum, starch, clay, wax. Decorative Material:ash, sand, cow-dung, rice husk,Clay, sand, phunanphadi(wet cloth), phuzei(wooden beater), kangkhil, sealed vessel slab, lepshum(cylindrical platform),Plastic clay mitti, mustard oil, potters wheel, edible gum, starch, feldspar, clay, wax .

 

 

Process:- 

 

The shapes which are required for a variety of uses are turned on the wheel.The certain portions such as the spout or the handle are left out.They are casted separately and than attached to the body. After it, the decoration is done by incising patterns on the surface for making geometrical patterns. 
 
The clay mixed with ash and sand is kneaded by feet, collected and cut with lahasur.It is then kneaded with hand, on peeda and a lump is made.All the solid particles are removed. The ready clay is kept on wheel for making various forms.A potters wheel has short sports, turns on a pivot of hard wood or metal and is provided with a large hub which acts as a revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel, and spins the wheel around with the stick. Due to the centrifugal force the lump of clay is pulled outwards and upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.
 
The pots are fired in simple open-pit kilns that are very efficient and inexpensive for firing pots at a temperature of 700 - 800 degree Celsius.The pots are arranged in layers of pots, a layer of leaves, twigs and cow dung cake is some times added.The mound is then covered with a blanket of rice straw which, in turn is covered with a thin layer of loamy soil.The firing takes four to five hours.
 
Black, red and yellow clay are used for making terracotta items, which are collected in the form of small pieces from Rajasthan and Delhi.The material is mixed properly and dried under the hot sun so that any sort of moisture, if present, may evaporate.Then the mixture of wet clay is filtered through a fine sieve to remove pebble. After giving shape with hands the items are then baked in the improvisede kilns covered with cow dung cakes, fuel and saw dust etc.
 
The clay, mixed with ash and sand is kneaded by feet.Then it is kneaded with hand on peeda & a lump is made.All the solid particles like gravel, small pebbles, twigs etc. are removed.The ready clay is kept on wheel to make various forms.A potters wheel has soft spokes, turns on a pivot of hard wood or metal and is provided with a large hub, which acts as revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel and spins the wheel around with a stick. Due to the centrifugal force the lump of clay is pulled outwards & upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.

 

 

Techniques:- 

 

Women potters practice a unique hand modeling technique, probably dialing back to earlier than Neolithic times before the invention of the wheel.The products made are surface of plain pots, water filters, vases, incense burners, lamps and hukkas. 

 

___________________________________________________________________________________________________________________________

 

 

How to reach:-


By Air:-

 

The airport in Kolkata is situated at Dumdum, around 17 km northeast of the city center. Most of the domestic airlines have direct services to and from Kolkata to other important cities of India such as Delhi, Mumbai, Chennai, Patna, Varanasi, Lucknow, etc. Kolkata provides direct flights to most of the countries in the Southeast Asia.

 

By Road:-

 

Kolkata is connected with most of the Indian cities by road. The Esplanade Terminus in the heart of the city is the main bus terminus. A new development is the starting of the Dhaka-Kolkata bus service. The buses are colorful, air-conditioned and comfortable.

 

By Train:-

 

The city has two major railway stations-one at Howrah and the other one at Sealdah. Trains from the other parts of the country connect Kolkata. Super-fast trains such as Rajdhani Express and Shatabdi Express connect the city to Delhi and nearby cities such as Bokaro and Rourkela. Coromandel Express and Gitanjali Express connect Kolkata to Chennai and Mumbai respectively.

 


 




About Implementing Agency



West Bengal     Kolkata     Suresh Amiya Memorial Trust